Fisher & Paykel MOTTK-FP Guide d'installation télécharger pdf

FISHER & PAYKEL TRADITIONAL MICROWAVE TRIM KIT

INSTALLATION INSTRUCTIONS

Installing Trim Kit

1. Cut opening in the cabinet face per the following dimensions:

Height: 17” + 1/16”, –0

Width: 24-3/4” + 1/16”, –0

Note: Refer to diagram on the following page. The minimum

cabinet depth is 20”. When installing the Microwave and

Trim Kit in combination with a Wall Oven or Warming

Drawer, please follow the recommendations in the

Microwave Installation/ Use & Care Manual.

2. Add adequate platform base support in the bottom of the

cabinet for tr

im kit base to rest on.

3. Mark a centerline on the front edge of the cabinet bottom

(Fig. 01).

4. Place trim kit base and align centerline mark to the triangular

notch on the front edge of the base (Fig. 02).

5. Drill 1/8” pilot holes in the cabinet using the base as a

template and install a screw through the base into the cabinet

bottom to prevent the base from shifting (Fig. 03).

6. Insert Microwave into opening on top of the base. The

Microwave feet should sit in the recesses on the base for

correct alignment. The Microwave should be plugged in at

this point.

Before you begin, read these instructions completely and carefully.

Getting Started

■ Remove packaging

Contents Tools Required

Part Description Qty

Trim Assembly 1

Base 1

Mounting Bracket (L/R) 2

Sheet Metal Screws 10

Fig. 01

Fig. 02

Fig. 03

1/8” Drill

#2 Phillip Screwdriver

1 2 3 4

Résumé du contenu

Page 1 - INSTALLATION INSTRUCTIONS

FISHER & PAYKEL TRADITIONAL MICROWAVE TRIM KITINSTALLATION INSTRUCTIONS Installing Trim Kit1. Cut opening in the cabinet face per the following di

Page 2 - 1/16"

1/16"Fig. 057. Place the right and left mounting bracket supports by resting the bottom edges of the supports on thebottom of the cutout (Fig 04)

Page 3 - Stainless Steel Care

Stainless Steel CareThis Trim Kit is made of stainless steel. Start with hot soapy water,rinse and dry. If the trim kit has food soil remaining,

Page 4 - P/N 242601 Rev. B 06/14

P/N 242601 Rev. B 06/14

Commentaires sur ces manuels

Pas de commentaire

Fisher & Paykel MOTTK-FP Guide d'installation

Naviguer en ligne ou télécharger Guide d'installation pour Kits de voiture Fisher & Paykel MOTTK-FP. Fisher & Paykel MOTTK-FP Installation Guide [es] Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels