Fisher & Paykel CG604DWFCX1 Guide de l'utilisateur télécharger pdf (Page 30)

Troubleshooting

Problem Possible solutions

There is a power failure.

Models with auto-reignition (CG905DWAC)

The gas supply will be cut off, even if a burner is in use.

The cooktop cannot be used if there is a power failure. Wait

until power is restored.

If a control dial is still turned on when the power is

restored, the corresponding ‘Burner On’ indicator will flash

rapidly. Turn the burner off and light it again to resume

cooking.

All other models (CG905DWFC, CG604DWFC, CG604CWC,

CG604LC)

You can still use your cooktop.

Light the burners by holding a match close to the side of

the burner and turning the control dial to HIGH. Wait until

the flame is burning evenly before adjusting.

CG905DWAC models

only: All my ‘Burner On’

indicators are flashing.

Turn all the control dials to O (OFF) and restart.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 36

Pas de commentaire

Fisher & Paykel CG604DWFCX1 Guide de l'utilisateur Page 30